Recover, Repair, Recycle

Benefit from Huntron's 30 years of providing quality Diagnostic Tools for PCA RecoveryWith today's valid concerns for protection of our environment, the recovery, repair and recycling of printed circuit assemblies (PCAs) is a positive move towards sustainable environmental-friendly practices.Huntron has been helping businesses troubleshoot and repair printed circuit assemblies for over 30 years. Repairing rather than discarding failed PCAs keeps the potentially harmful chemical components such as lead out of our world's landfills and disposal sites.Below is a list of Huntron products to help you recover, repair and recycle PCAs:• Huntron Tracker 2800• Huntron Tracker Model 30• Huntron TrackerPXI• NFSA RF ProberNew Version of Huntron Workstation Available!A new version of Huntron Workstation is now available for download. Go to the Workstation Support web page to download version 4.1.3273! Update December 22, 2008.New Automated Near Field Signature AnalysisCombining the Huntron Access Robotic Probing Station, Huntron Workstation Software and the new Test Evolution (TEV) Non-Contact RF Near Field Probe with local synthetic measurement technology sets the standard for Near Field Signature Analysis (NFSA).Placing the sensor, receiver and signal processing in one compact RF Probe assembly allows the sensing of EM fields emanating from RF circuitry. A specific position in a Near Field is defined as a Virtual Test Point™ (VTP) where a NFSA measurement is made. Identical circuits emanate nearly identical fields at the VTP. The combination of Huntron Prober and TEV RF Probe allows accurate positioning and measurement of VTPs. This provides the repeatability to measure VTP's from 200MHZ to 3GHZ on RF assemblies.When used for test, an engineer examines the UUT schematic with an eye toward following the RF signal path. Using Huntron Workstation Software, points along that path are selected for Virtual Test Points (VTP). A set of known good boards are then scanned making and saving Near Field signatures at the VTP's. Unknown UUT's are scanned with the same VTP's against the saved signatures. Any deviation against stored signatures indicates areas of concern.Near Field Signature Analysis (NFSA) is close proximity sensing of EM fields emanating from RF circuitry. Near Fields are close to active circuits with the strength dependent on power and circuit design. AC circuits radiate a unique frequency and magnitude “signature” being a function of frequency of operation, magnitude, distance to the test probe and geometric location of the probe.The RF NFSA Prober will be available from Huntron to USA customers only in early 2009. Contact Huntron for more details on Near Field Signature Analysis.Download the latest NFSA RF Prober brochure now!Huntron Access USB ProbersThe NEW Huntron Access USB Probers are the latest versions of the popular robotic probers used to automate testing of complex printed circuit boards. The Access USB Probers come in two sizes - the Access USB Prober can handle PCBs up to 19.4” by 14” and the larger Access 2 USB Prober can hold PCBs up to 22” by 23” in size. The new Probers come with a USB Probe Tip camera to monitor the probe placement as the test progresses. Both Probers uses linear encoders for incredible 20 micron accuracy. The new Access USB Probers can also be ordered with the Tracker Model 30 embedded inside the chassis for a space saving, all-in-one platform.Download the latest Diagnostic Systems brochure now!Huntron's flexible, automated diagnostic solutions help people solve circuit card problems.
Huntron was founded in 1976 with the introduction of the Huntron Tracker®, the pioneering troubleshooting tool that uses power-off signature analysis to identify component failures on printed circuit boards.
Today, Huntron's reputation in providing automated power-off diagnostics results in instrumentation and software for test, inspection and repair of electronic printed circuit assemblies.As density and complexity increase, printed circuit assemblies become tougher to probe and test. Huntrom complements conventional test equipment with access and test tools that catch the elusive problems other test methods often miss. The keys are physical and virtual access, which translates into meaningful results such as shorther design cycles, improved production yield and lower warranty costs. When you need to test, diagnose or troubleshoot complex circuit boards, Huntron lets you access, explore and discover more.Contact us for more information on how we can help solve your test and troubleshooting needs

Super Series™Vacuum Furnace SystemIt’s

super-precise and super-fast. TheT-M Vacuum Super Series vacuum furnace system is the high-vacuum,high-temperature technically advanced vacuum furnace to satisfy all yourheat-treating needs.Within its all- stainless steel chamber is a two cubic footwork zone capable of holding up to 200 pounds of material for tempering,austenitizing, hardening, stress relieving, brazing, sintering, bonding,annealing, and many other custom vacuum processes.With the standard three-zoneheat control package and electro-pneumatically operated Heat Pack door shieldassembly, a precision heating environment is created for perfect temperatureuniformity.The specially designed Hot Zone-to-chamber ratio enables thehigh-speed pumping system to reach high vacuum quicker,maximizing yourproductivity and quality with a cleaner work zone. With its inert gas on boardQuick Cool System, the metallurgical gas quench increases your cycle times byrapidly cooling the chamber and increasing your product output.The Super SeriesHMI software system can be configured with our controlled cooling,allows theuser to precisely control the cooling environment.The Super Series vacuumfurnace system can also be configured to accept multiple process gases. Once youhave determined your specific process parameters,the computerized control systemtakes over to completely automate the process and archive all system data. Anoperator needs only to load and unload the chamber and press the startbutton.The Super Series vacuum furnace system is a completely contained unitwith no exposed wires, cables or pumps.This saves you valuable factory floorspace, and keeps your unit clean and easy to maintain. System installation is assimple as connecting the unit to electric service and attaching gas,water andair lines. The Hot Zone is fully removable for service.If the Super Series workzone is not large enough for your application, please ask about our PACER SeriesVacuum Furnace System.Temperature Capabilities and Controllability 10 series1000°C (1832°F)13 series 1315°C (2400°F)14.5 series 1415°C (2650°F)16.5 series1650°C (3000°F)20 series 2000°C (3632°F)

+/- 1 degree controllability

<

+/- 2°C temperature uniformity*

SCR Power Supply regulation

3-zone heat

control with independent

PID loop control

Vacuum Pumping System

Standardpump down time*

To 0.1 Torr 7 minutes10-5

Torr Scale 15 minutesHigh-

VacuumValve: T-M 6" Right Angle Poppet Valve6" diffusion pump – net pumpingspeed:2,400 l/s42.2 cfm mechanical roughing & backing pump3.8 cfmmechanical hold pumpAvailable:Upgraded pumping systems – Mechanical,dry, diffusion, cryogenic, and turbo-molecularMolecular Sieve orMechanically refrigerated, optically-dense, cold trap in roughing line or liquidnitrogen cryo-trap in high-vacuum line (for prevention of hydrocarboncontamination)Inert Gas and Quick Cool System10 HP blower – 4,200 cfmfree air displacementGas/water heat exchanger18 vents directing QuickCool gas onto workloadIntegral with furnace chamber, no externally mountedcomponentsAvailable:Multiple-process gas capability

ControlledCooling

System ControlsThe “E” control system: full PC, PLC, and HMIsoftware control package will provide superior control, system analysis, recipemanagement, and data acquisition. With more than 14 user-friendly screensdisplayed on its 17" LCD flat panel touch screen, this state-of-the-art systemeliminates the need for separate programmers, controllers and messagedisplays.Over-temperature controlDigital vacuum displayCenter ofload thermocouple standardEmergency StopAvailable:Multiple-surveythermocouplesUninterrupted power supplies (UPS)Multiple-channel colorstrip chart recorderOperating Pressure RangeHigh-vacuum to 2-bar (higherpressures available)Working pressure at maximum temperature: high-vacuum to1 torr (higher pressures available)Capable of pressures between atmosphereand 2-bar (for Quick Cool use)6-bar availableHot ZoneConstructionUsable work zone 12" W x 12" H x 24" DUsable work zonevolume of 2 cubic feetWork load capacity 200 lbsRound,horizontally-mounted Hot Zone comprised of six (6) high temp/lowresistancemolybdenum 2" band heater elementsHeat shielding is composed of molybdenumlayers backed by stainless steel layersin stainless steel containment and anelectro-pneumatically operated Heat Pack door shield assemblyComplete HotZone is easily removable as a unit for fast maintenance and less downtimeMolybdenum hearth assembly is 12" W x 24"DAvailable:Graphite andtungsten heating elementsGraphite insulation in stainless steelcontainmentChamberAll-stainless steel construction including head-endclosure and water jacketingDual-wall chamber configuration designed to allowcomplete water-to-surface contactStainless steel dual-wall, water-cooleddoorWater cooling for power feed-thru is external to vacuum chamber,eliminating thepossibility of water leaking into the chamberSix clamp overcenter pneumatic clamp/locking doorWorking pressure: Full vacuum to 2-bar(6-bar available)Safety FeaturesAll T-M Vacuum Products, Inc. products areequipped with standard safety features toensure safe operation.Please consultT-M Vacuum Products, Inc. at (856) 829-2000 for availability and pricing ofthese or any other option requirements.*All times and pressures are for clean,dry, empty, out-gassed furnace, starting from ambient pressure and temperature,and may vary. Times and pressures subject to pump size and maximumtemperature

ASC process systems

ASC is a leading manufacturer of specialized process equipment, control systems, and custom manufacturing software used in the composites, plastics, glass, solar, lumber, and concrete, coatings, and finishing industries. Our product lines include composite autoclaves, glass-laminating autoclaves, concrete autoclaves, industrial ovens, composite ovens, electroplating automation systems, process control software, autoclave control software, oven control software, and crane and hoist control software including scheduling. We're located in Los Angeles, CA and support thousands o
Autoclaves and other equipment
ASC manufactures a range of process equipment, including autoclaves, ovens, presses, heating systems, cooling systems, vacuum systems, and specialty pressure equipment. We also buy and sell used equipment.
systems and hundreds of customers w
Control & power systems
ASC is a leading supplier of control and power systems for a wide variety of equipment and industries. We specialize in PC-based and PLC-based control solutions. Our PC-based systems typically feature our industry-standard CPC control software package.
orldwide.
Software for controls and manufacturing
ASC can develop custom software solutions for a wide variety of manufacturing applications. Our CPC software is the world's leading software for control of autoclaves, ovens, and many other applications. Our FLEXTIME software is also the leading PC-based solution for electro-plating and anodizing control

Powered by a 100MHz DSP platform using FPGA technology.

Welcome to the Dakota Ultrasonics website!We are a manufacturer of industrial ultrasonic testing equipment most commonly used in the petrochemical, aerospace, automotive, and other generally related industries. The pages that follow will provide you with general information regarding our products. If you have any questions, need technical support, or have a request for custom items, please contact us at your leisure using the information provided on this site.Our products are commonly used to determine the thickness of a variety of materials by making contact with only one side of the material being tested. They have the ability to detect very fine pits, flaws, and porosity in materials without having to destroy the material or parts being tested. This is done by converting the transit time of a sound wave, sent into and reflecting back from a defect or opposite surface in the test material, into a length measurement. This technique uses principles similar to that of sonar.We also manufacture a line of ultrasonic bolting equipment that very accurately measures the stress, elongation, and load in threaded fasteners. These products are typically used in critical bolting applications where extreme accuracy is needed. If you have any specific or specialized bolting applications in mind, be sure to contact us to discuss your requirements in detail.

SHADYSİDE INN SUİTES

Shadyside Inn Suites is different. Your idea of staying in a hotel is about to change. Our suites are not typical hotel rooms. In fact we do not have rooms; we only offer suites. Why are we different? Your suite is a fully furnished apartment with the same amenities as a hotel located in a residential neighborhood. It’s not just any neighborhood, it's Shadyside, Pittsburgh’s most quaint, trendy, and upscale urban area. Picture Boston’s Newberry Street, or New York’s East Village and you will get an idea of what the Shadyside area is like.Imagine having your own apartment in the best location in Pittsburgh for as little as a day or for as long as a lifetime. Shadyside Inn Suites is as flexible as you need. Only going to be here for a night? Why not have your own fully equipped apartment? Need somewhere to stay for a month while your house is renovated? Shadyside Inn Suites is your answer. Looking to attend the University for only nine months? Shadyside Inn Suites can accommodate. Think this is going to cost you more than a hotel? Not even close. Our rates are lower, our suites are double the size of any hotel in the area, our parking is free, and our location is unrivaled.Our suites are located within a block or two of some of the best dining, entertainment, and shopping in Pittsburgh. At your door are 135+ shops, 15+ restaurants and some of the best nightlife in the area. Shop in small boutiques, visit your favorite national store, and dine on cuisines from all over the world. Shadyside living is unmatched.Stay in Shadyside and still be approximately 4 miles from Downtown Pittsburgh and the Convention Center and less than 1 mile from the following hospitals: Presbyterian, Montefiore, Magee Women's, Falk Clinic, West Penn, Children's, Shadyside Hospital, and Western PsychiatricWithin 1 mile of the Shadyside Inn Suites is The Carnegie Museum of Art, The Museum of Natural History, The University of Pittsburgh, Carnegie Mellon University Chatham College, and Carlow College.Besides coming for a visit, the best way to learn about our story is read what other people have said about us. Please click on the following links to read what the professionals have to say

UC4 certified for use with the Avaloq Banking Syst...

Automated scheduling of Avaloq Banking System (ABS) and enterprise systems with UC4 Workload Automation SuiteVIENNA, February 3, 2009 – UC4 Software, a leading global provider of workload automation, job scheduling and IT process optimization solutions, today announced the certification of UC4 Workload Automation Suite for use with the Avaloq Banking System (ABS) version 2.6. The companies have also signed a partnership agreement that will enhance Avaloq to refer customers requiring a complementary scheduling and automation solution to UC4 Software.“The certification of the UC4 adapter enables organisations to utilise a complementary technology that has been successfully tested and validated against our Model Bank environment,” said Adrian Bult, COO, Avaloq Evolution AG. “Joint customers will be able to increase the return on their existing technology investments leveraging a solution that interfaces directly with the Avaloq Banking System.”Avaloq solutions are changing the IT landscapes within private and retail banks in Switzerland, Germany, Liechtenstein, Luxembourg, Singapore, Hong Kong and other markets. With UC4 Workload Automation Suite enterprises remove manual intervention, reduce latency and mitigate risk from their end-to-end business processes. The UC4 Business Integration for Avaloq communicates directly with ABS through application interfaces, allowing customers to extend the automated scheduling of their core banking systems and integrate with external applications.UC4 Workload Automation Suite can manage back-end processing for ABS and all other surrounding systems that many finance institutes rely on. Avaloq users receive regular software updates which support banks in remaining compliant with industry regulations. When utilizing additional tools it is important that Avaloq users work with solutions that are compatible and certified for use with Avaloq. This reduces maintenance and support issues and allows joint customers to benefit from the enterprise wide visibility and control provided by UC4.“It gives UC4 great pleasure to extend its relationship with Avaloq,” said Cesare Capobianco, chief executive officer, UC4 Software. “We have benefited from an excellent working partnership working towards receiving this certification. It has allowed us to develop an interface that is compliant with Avaloq’s technical specifications, which also delivers measurable business value to our joint customers.”About AvaloqThe Avaloq Group, with branches in Luxembourg and Singapore, is the Swiss market leader in the field of standard banking software. For over a decade, the Swiss company has been developing and marketing the Avaloq Banking System. It is trusted by leading financial service providers in private, retail and universal banking in international financial centres around the globe. A network of specialists with first-class partners in the areas of implementation, software, service and technology enables Avaloq to offer its clients a comprehensive all-in-one solution – a modular, innovative and integrated standard software for the financial sector. Avaloq is owned by its management and employees.About UC4 SoftwareUC4 Software is a leading global provider of workload automation, job scheduling and IT process optimization solutions that ensure core business processes and enterprise information systems run faster, more accurately and without interruption. More than 1,600 companies worldwide have successfully enhanced application processing performance and improved IT efficiency using UC4’s business acceleration solutions. Customers include American Suzuki Motor Corporation, Cadbury, eBay, Eastman Kodak, General Electric, Mattel, McGraw Hill, Panasonic, Robert Bosch, Sun Microsystems, Symantec, T-Systems and Verizon

High Flow Range Mass Coriolis Flow Meter

Ideal for the measurement of flow, density and temperature of liquids and slurries, such as aggressive or contaminated, sanitary or particle-filled fluids.Features:
Flow ranges from 60 to 60K Kg/Hr (2.2 to 1650 lb/min)
Accuracy up to 0.25% of reading
Materials: flow tubes - 316 L, splitter flanges - 316 Ti, housing - cast iron
Process temperature -40°F to 356°F
Ambient temperature -40°F to 140°F
Wide flow ranges
ACCURATE AND RELIABLEThis meter has the ability to maintain high accuracy, despite changing viscosity conditions, with accuracy of +0.25% of reading.

EASY CLEANING
The ACM series has smooth stainless steel tubes and no moving parts, and is therefore very easy to flush and clean.

MULTI-TASKINGThe ACM series of mass coriolis flow meters measure flow, density and temperature.

MATERIAL COMPATIBILITY
Because of the meter's 316 stainless steel flow tubes, the ACM series can measure a wide range of materials.

VARIETY OF ELECTRONICS
Electronics available for the ACM series include a local, hazardous rated display and a remote, panel-mount digital display.